Important Features of Metal Roofing

Metal Roofing : Ultimate Buying Guide

Metal roofing has become a well-liked choice for residential roofs for its durability, and therefore the hottest amongst them for homes is standing-seam metal roofs. Essentially, this sort of roofing raises the seams beyond the extent of the particular roof, thereby creating panels that run from the ridge to the eaves of the roof.

Standing seam metal roofing may be a fierce competitor for a home roofing option against others like asphalt shingles and clay or concrete tiles. it’s one of the various services Saalfeld Roofing provides for clients around Omaha, so here we share more about it.

Click here for the best Lawrence Metal Roofing Company

Key features

Standing seam metal roofs are often pre-formed within the factory or site-formed at your residence on installation.

There are 4 sorts of standing seam metal: Mechanically seamed, Symmetrical mechanically seamed, One Piece Snap-Lock, Two-Piece Snap-Lock.

They are defined by seam fasteners. Although they’re concealed, the seam fasteners are what gives standing seam metal roofs their strength and creates the continual ridges.


Durability. Metal is well-known for being tough and impervious to most elements.

Low maintenance. If installed properly, standing seam metal roofs would require little or no to no maintenance.

Longevity. A standing seam metal roof can last up to 50 years, making it an honest upfront investment, and justifying its high upfront cost.

Cooling and energy reduction. Metal’s reflective surface means solar heat is deflected, thereby reducing the necessity for artificial cooling (an energy cost) inside the house.

Sleek design. A far cry from the metal roofs of earlier years, standing seam metal roofing allows for a suave, modern look with clean, contemporary lines.

Metal Roof Materials
When it involves roofing, the word “metal” covers tons of territory. Metal roofing is produced from a spread of materials, including steel, aluminum, chrome steel, copper, and zinc alloys. Of course, all of those have clear differences that affect durability, price, appearance, and more.

Steel and aluminum are far and away from the foremost commonly available metal roofing materials. Both are relatively economical, durable, and hold paint finishes well.

Steel Roofing
Most metal roofing is formed from steel, which is heavier and sturdier than aluminum (though some metal building material is named “steel roofing,” it’s going to be made up of any of several materials, including alloys). The gauge of steel affects its performance and sturdiness. Two common gauges of steel roofing are G-60 and thinner-gauge G-90. The latter is a smaller amount expensive and typically used for low-end corrugated and ribbed metal roofing panels.

Aluminum Roofing
Aluminum may be a very lightweight, relatively soft metal, so it’s more susceptible to denting and damage than steel, and it isn’t as rigid as steel. On the opposite hand, aluminum won’t rust or corrode the way steel can if the finish is compromised. For appearance, it’s nearly always painted or coated similarly to steel.

Looking for metal roof repair? Just click here. 

Similar Posts

Leave a Reply